New Philips 989803194541 Battery for CM10, CM12, CM120, CM150 Patient Monitors

Genuine Philips 989803194541 Battery for CM10 / CM12 / CM120 / CM150 – Critical Power for Patient Monitoring

Exact replacement for Philips part number: 989803194541. Compatible with Philips CM10, CM12, CM120, CM150 patient monitors (and select IntelliVue series).

In an ICU, emergency department, or surgical ward, your Philips patient monitor runs 24/7. It tracks heart rate, blood pressure, and SpO₂. These vital signs help your team make life-saving decisions. When the monitor’s battery starts to fail, you lose more than mobility. You lose confidence.

The 989803194541 is the factory-spec battery for Philips CM series monitors. When new, it offers hours of backup power. This is enough for intra-hospital transport, patient transfers, or short mains interruptions. After a couple of years of daily charging, capacity fades. You may get “low battery” warnings in just 30 minutes. Sometimes, the monitor might shut down unexpectedly while moving.

You don’t need to pay Philips's premium price ($300+). You can't trust a $50 generic. It might trigger error codes, swell, or fail during a transfer. This genuine replacement battery provides the same medical-grade reliability as the original. Plus, it comes at a lower cost.

Quick Specs – What You’re Getting

A healthy 989803194541 battery restores your CM monitor to its original backup runtime – enough for safe transport and uninterrupted monitoring.

OEM vs. Genuine Replacement vs. Cheap Generic – What’s the Real Difference?

Not every battery that physically fits your Philips monitor is safe for clinical use. Here’s how the three options compare.

 Critical for clinical engineers and biomed departments
A patient monitor is a life‑critical device. A cheap generic battery can cause error codes, fail to charge, or even damage the monitor’s power board. Our genuine replacement meets the same safety and performance standards as the Philips original – without the inflated OEM markup.

3 Signs Your CM Monitor Needs a New 989803194541 Battery

1. Reduced runtime – The monitor used to last through a typical transport (e.g., 2 hours). Now you see “low battery” warnings after only 30–60 minutes.

2. Error messages – The monitor displays “battery error,” “low battery,” or “replace battery” even after a full charge cycle.

3. Physical swelling – The battery pack looks puffy, doesn’t slide in smoothly, or the case bulges. Replace immediately – a swollen lithium‑ion battery is a fire risk and can damage the monitor.

If your CM monitor’s battery is more than 2–3 years old or showing any of these signs, replace it now. Your patients and staff depend on reliable monitoring.

Why Choose Our Genuine 989803194541 Battery?

•  Medical‑grade cells – Same safety and performance as Philips original.

•  Fresh stock – Manufactured within the last 6 months. Date printed on label. No degraded shelf inventory.

•  Exact fit – Same dimensions, connector, and latch as OEM. Slides in and locks securely.

•  Full safety certifications – IEC 60601‑1 (medical electrical equipment), UN38.3 (air transport), CE, RoHS.

•  No error codes – Fully compatible with CM10, CM12, CM120, CM150. No “battery not recognized” messages.

•  12‑month warranty – If it fails within 12 months, we send a free replacement.

•  Up to 60% less than Philips direct – You don’t need to pay the full medical OEM markup.

Your patients deserve reliability, not a gamble. Our genuine 989803194541 gives you OEM quality at a fair price.

Frequently Asked Questions (FAQ)

Q: Will this battery work with my Philips CM10, CM12, CM120, or CM150?

Yes. 989803194541 is the official battery for these CM series monitors. Some IntelliVue X2 and MX series also use the same battery – check your original battery label. If it says 989803194541, this is the direct replacement.

Q: How do I replace the battery? Is it user‑serviceable?

Replacement should be performed by qualified biomedical engineering staff. The battery compartment is typically accessible with a latch or a few screws. Follow your Philips monitor’s service manual. We provide installation instructions, but we strongly recommend professional replacement to ensure proper handling and safety.

Q: How long does a full charge last after replacement?

Consult your Philips monitor’s user manual for expected runtime. A new genuine battery restores original backup time – typically 2–4 hours depending on monitor configuration and workload (display brightness, number of parameters).

Q: Can I charge this battery in the original Philips monitor docking station?

Yes. It is fully compatible with Philips’ charging systems. No modifications needed.

Q: Is this battery safe for air transport (e.g., for hospital helicopters or fixed‑wing)?

Yes. It meets UN38.3 transportation safety standards. For medical use, always follow your hospital’s policies and aviation regulations for carrying spare lithium batteries in medical equipment.

Q: What if my monitor shows a battery error after installation?

First, ensure the battery is fully seated and the connector is secure. Charge the monitor for at least 2 hours. If the error persists, try a hard reset (refer to your monitor’s technical manual). If none works, contact us for a replacement under warranty.

Q: Do you offer discounts for hospitals or biomedical departments buying multiple batteries?

Yes. For orders of 5+ batteries, contact us for a quote. We work with biomed departments, group purchasing organizations, and hospital supply chains.

Ready to Restore Your CM Monitor’s Backup Power?

Don’t let a worn‑out or generic battery compromise patient monitoring. This genuine Philips 989803194541 replacement gives you the same performance, safety, and longevity as the original – at a price that makes replacing aging batteries a smart investment for your department.