Accessories-Mall
2PCS E8P 10000MAH battery for GardePro Trail E6P E6PCF E8P E8PWF X60P X60PM
2PCS E8P 10000MAH battery for GardePro Trail E6P E6PCF E8P E8PWF X60P X60PM
Couldn't load pickup availability
2-Pack E8P 10000mAh USB-C Battery for GardePro Trail Cameras
Two 10000mAh lithium-polymer replacement batteries for GardePro trail cameras. Fits E6P, E6PCF, E8P, E8PWF, X60P and X60PM. USB-C rechargeable — charges from a wall plug, power bank, car charger, or solar panel. 45-50 days of field runtime per charge. Up to 2000 cycles.
Product Overview
This 2-pack E8P 10000mAh battery set keeps your GardePro trail camera running for weeks in the field. Each battery holds 10000mAh — about 3 times the capacity of the stock 3200mAh GardePro battery. One battery in the camera, one charging at home. When you check your camera every 30-45 days, just swap and go.
Both batteries charge via USB-C. Plug into a wall charger, car charger, power bank, or solar panel. A full charge takes about 5 hours. An LED indicator shows red while charging and green when full. No special charger needed.
Compatible GardePro Models & OEM Part Numbers
Compatible Trail Cameras
- > GardePro E6P
- > GardePro E6PCF
- > GardePro E6PMB
- > GardePro E8P
- > GardePro E8PWF
- > GardePro E8PMB
- > GardePro X60P
- > GardePro X60PMB
Replaces OEM Battery Models
| OEM Model | Description |
|---|---|
| LN800 | Standard GardePro OEM battery (~3200mAh) |
| L1000D | Extended GardePro OEM battery variant |
Specifications
| Specification | Detail |
|---|---|
| Package | 2 batteries |
| Battery Type | Lithium-Polymer (Li-Po) rechargeable |
| Voltage | 3.85V |
| Capacity | 10000mAh / 38.5Wh (OEM is ~3200mAh) |
| Charging Port | USB-C (Type-C), 5V/2A input |
| Charge Time | ~5 hours (0 to full) |
| Field Runtime | 45-50 days per charge (typical trail camera use) |
| Charge Cycles | Up to 2000 cycles |
| Operating Temperature | -20C to +45C (-4F to 113F) |
| Protection | Built-in BMS: overcharge, over-discharge, over-current, overheat, short-circuit |
Why Choose This 2-Pack Battery Set
3x OEM Runtime
10000mAh vs stock 3200mAh. 45-50 days in the field. Check your camera less often.
One In, One Charging
2-pack means zero downtime. Swap batteries when you visit your camera. Always have a full spare ready.
USB-C — Charge Anywhere
Wall charger, car charger, power bank, solar panel. No special dock needed. LED shows charging status.
Cold Weather Ready
Works from -20C to +45C. Lithium-polymer cells resist capacity loss in freezing temperatures.
Up to 2000 Charge Cycles
4x the cycle life of standard Li-ion batteries. Years of seasonal use before replacement.
Fits 8 GardePro Models
E6P, E6PCF, E6PMB, E8P, E8PWF, E8PMB, X60P, X60PMB. Replaces LN800 and L1000D.
How to Install & Charge
Installation
- Power off the camera and remove the SD card.
- Slide open the battery compartment cover. Do not use tools.
- Unplug the old battery by pulling it straight out from the socket.
- Align the gold-plated terminals and push the new battery in until it clicks.
- Avoid touching the copper contacts with bare fingers to prevent static damage.
Charging
Each battery has a built-in USB-C port. Connect to any 5V/2A USB power source — wall charger, car charger, power bank, or solar panel. The LED glows red while charging and turns green when full. Full charge takes about 5 hours.
Frequently Asked Questions
Q: Does this battery fit my GardePro trail camera?
A: Yes. This E8P battery fits GardePro trail camera models E6P, E6PCF, E6PMB, E8P, E8PWF, E8PMB, X60P, and X60PMB. It replaces OEM battery models LN800 and L1000D. Check your original battery label to confirm.
Q: How long does the 10000mAh battery last in the field?
A: With 10000mAh capacity, this battery lasts 45-50 days per charge in typical trail camera use. That is about 3 times longer than the stock 3200mAh battery which lasts around 14 days. Actual runtime depends on how many photos your camera takes, night flash usage, and temperature.
Q: How do I charge this battery?
A: The battery has a built-in USB-C port. You can charge it with any USB-C cable and a standard 5V/2A USB charger, car charger, power bank, or solar panel. A full charge takes about 5 hours. An LED indicator near the USB-C port shows red while charging and green when full.
Q: Can I use this battery in cold weather?
A: Yes. This lithium-polymer battery works from -20C to +45C (-4F to 113F). It resists capacity loss in freezing temperatures better than standard lithium-ion cells. For best results in extreme cold, keep a spare battery indoors and swap as needed.
Q: Why does this come as a 2-pack?
A: One battery in your camera, one charging at home. When your camera battery runs low after weeks in the field, swap in the fully charged spare. No downtime. This is the standard setup for hunters and wildlife monitors who check cameras every 30-45 days.
Q: Which GardePro cameras does this battery NOT work with?
A: This battery does not work with GardePro A3, A3S, or older models that use AA batteries. It also does not fit non-GardePro brand trail cameras. Always check your camera manual or original battery label for LN800 or L1000D before ordering.
Summary
| Package | 2 batteries |
| Capacity | 10000mAh each (OEM is ~3200mAh) |
| Field Runtime | 45-50 days per charge |
| Charging | USB-C, any 5V/2A source, ~5 hours |
| Charge Cycles | Up to 2000 cycles |
| Compatible | GardePro E6P, E6PCF, E6PMB, E8P, E8PWF, E8PMB, X60P, X60PMB |
2-Pack E8P 10000mAh USB-C Battery for GardePro Trail Cameras
Two 10000mAh lithium-polymer replacement batteries for GardePro trail cameras. Fits E6P, E6PCF, E8P, E8PWF, X60P and X60PM. USB-C rechargeable — charges from a wall plug, power bank, car charger, or solar panel. 45-50 days of field runtime per charge. Up to 2000 cycles.
Product Overview
This 2-pack E8P 10000mAh battery set keeps your GardePro trail camera running for weeks in the field. Each battery holds 10000mAh — about 3 times the capacity of the stock 3200mAh GardePro battery. One battery in the camera, one charging at home. When you check your camera every 30-45 days, just swap and go.
Both batteries charge via USB-C. Plug into a wall charger, car charger, power bank, or solar panel. A full charge takes about 5 hours. An LED indicator shows red while charging and green when full. No special charger needed.
Compatible GardePro Models & OEM Part Numbers
Compatible Trail Cameras
- > GardePro E6P
- > GardePro E6PCF
- > GardePro E6PMB
- > GardePro E8P
- > GardePro E8PWF
- > GardePro E8PMB
- > GardePro X60P
- > GardePro X60PMB
Replaces OEM Battery Models
| OEM Model | Description |
|---|---|
| LN800 | Standard GardePro OEM battery (~3200mAh) |
| L1000D | Extended GardePro OEM battery variant |
Specifications
| Specification | Detail |
|---|---|
| Package | 2 batteries |
| Battery Type | Lithium-Polymer (Li-Po) rechargeable |
| Voltage | 3.85V |
| Capacity | 10000mAh / 38.5Wh (OEM is ~3200mAh) |
| Charging Port | USB-C (Type-C), 5V/2A input |
| Charge Time | ~5 hours (0 to full) |
| Field Runtime | 45-50 days per charge (typical trail camera use) |
| Charge Cycles | Up to 2000 cycles |
| Operating Temperature | -20C to +45C (-4F to 113F) |
| Protection | Built-in BMS: overcharge, over-discharge, over-current, overheat, short-circuit |
Why Choose This 2-Pack Battery Set
3x OEM Runtime
10000mAh vs stock 3200mAh. 45-50 days in the field. Check your camera less often.
One In, One Charging
2-pack means zero downtime. Swap batteries when you visit your camera. Always have a full spare ready.
USB-C — Charge Anywhere
Wall charger, car charger, power bank, solar panel. No special dock needed. LED shows charging status.
Cold Weather Ready
Works from -20C to +45C. Lithium-polymer cells resist capacity loss in freezing temperatures.
Up to 2000 Charge Cycles
4x the cycle life of standard Li-ion batteries. Years of seasonal use before replacement.
Fits 8 GardePro Models
E6P, E6PCF, E6PMB, E8P, E8PWF, E8PMB, X60P, X60PMB. Replaces LN800 and L1000D.
How to Install & Charge
Installation
- Power off the camera and remove the SD card.
- Slide open the battery compartment cover. Do not use tools.
- Unplug the old battery by pulling it straight out from the socket.
- Align the gold-plated terminals and push the new battery in until it clicks.
- Avoid touching the copper contacts with bare fingers to prevent static damage.
Charging
Each battery has a built-in USB-C port. Connect to any 5V/2A USB power source — wall charger, car charger, power bank, or solar panel. The LED glows red while charging and turns green when full. Full charge takes about 5 hours.
Frequently Asked Questions
Q: Does this battery fit my GardePro trail camera?
A: Yes. This E8P battery fits GardePro trail camera models E6P, E6PCF, E6PMB, E8P, E8PWF, E8PMB, X60P, and X60PMB. It replaces OEM battery models LN800 and L1000D. Check your original battery label to confirm.
Q: How long does the 10000mAh battery last in the field?
A: With 10000mAh capacity, this battery lasts 45-50 days per charge in typical trail camera use. That is about 3 times longer than the stock 3200mAh battery which lasts around 14 days. Actual runtime depends on how many photos your camera takes, night flash usage, and temperature.
Q: How do I charge this battery?
A: The battery has a built-in USB-C port. You can charge it with any USB-C cable and a standard 5V/2A USB charger, car charger, power bank, or solar panel. A full charge takes about 5 hours. An LED indicator near the USB-C port shows red while charging and green when full.
Q: Can I use this battery in cold weather?
A: Yes. This lithium-polymer battery works from -20C to +45C (-4F to 113F). It resists capacity loss in freezing temperatures better than standard lithium-ion cells. For best results in extreme cold, keep a spare battery indoors and swap as needed.
Q: Why does this come as a 2-pack?
A: One battery in your camera, one charging at home. When your camera battery runs low after weeks in the field, swap in the fully charged spare. No downtime. This is the standard setup for hunters and wildlife monitors who check cameras every 30-45 days.
Q: Which GardePro cameras does this battery NOT work with?
A: This battery does not work with GardePro A3, A3S, or older models that use AA batteries. It also does not fit non-GardePro brand trail cameras. Always check your camera manual or original battery label for LN800 or L1000D before ordering.
Summary
| Package | 2 batteries |
| Capacity | 10000mAh each (OEM is ~3200mAh) |
| Field Runtime | 45-50 days per charge |
| Charging | USB-C, any 5V/2A source, ~5 hours |
| Charge Cycles | Up to 2000 cycles |
| Compatible | GardePro E6P, E6PCF, E6PMB, E8P, E8PWF, E8PMB, X60P, X60PMB |
| Model No | L1000D |
| Warranty | 1 Year Warranty |
🔋 Lithium-Ion Battery Conditioning
For optimal electrochemical performance, new lithium-ion batteries should undergo 2–3 complete charge and discharge cycles before reaching full capacity.
This stabilization phase allows the internal cell chemistry to achieve balanced ion distribution, ensuring maximum runtime, stable voltage output, and extended cycle life.
After this initial conditioning period, no further full discharge cycles are required.
🛡 Premium Warranty Protection
- 12-Month Limited Manufacturer Warranty
- Up to 30-Day Return Guarantee (Policy Based)
- Replacement for defective or misrepresented items
- Dedicated customer service response within 24 hours
🚚 Professional Shipping Standards
- Orders placed Monday–Friday are processed within 1–2 business days. Orders placed on weekends are processed the following Monday.
- Tracking information appears in your order within 1–2 business days after dispatch.
- Transit time varies by region and logistics carrier
- Please verify your shipping address before order confirmation
- Address changes are not possible once shipment is dispatched
📌 Product-Specific Notice
📩 Customer Care Commitment
We are committed to delivering professional-grade battery solutions and responsive after-sales service. If you experience any issues, please contact our support team before leaving feedback.
✓ Safety & Quality Assurance
- Built-in protection against overcharging, overheating, and short circuits.
- Shipped in compliance with IATA regulations for lithium batteries.
- Compatible with OEM chargers. No firmware modification required.
Questions about compatibility? Contact us with your device model number before ordering.
Cao Chuanping
Power Systems Consultant · 8+ years in replacement battery sourcing & evaluation · View profile →
All batteries sold on accessories-mall.com are replacement parts. accessories-mall.com doesn't affiliate with any of the original manufacturers. Any registered trademarks or model names listed above are identified as purposes of showing compatibility only.
