RRC2040‑2 125D‑613 Battery Replacement for Drive DeVilbiss iGo2 Portable Oxygen Concentrator

RRC2040‑2 Battery for Drive DeVilbiss iGo2 Portable Oxygen Concentrator (125D‑613)

Exact replacement for Drive DeVilbiss part number: 125D‑613. Compatible with iGo2 portable oxygen concentrator. Same RRC2040‑2 platform used in industrial flaw detectors – now for medical use.

If you use a Drive DeVilbiss iGo2 for oxygen therapy at home or on the go, battery life matters. When the original battery fades, your freedom shrinks. It might die mid-trip, shut down at 30%, or refuse to charge. You’re tied to an outlet instead of living your day.

The iGo2 is a reliable, FAA-approved portable concentrator. Its original battery (125D-613, from the RRC2040-2 cell platform) lasts 2 to 3 years with regular use before wearing out. You don’t need to pay Drive DeVilbiss’s $300+ price for a replacement. And you definitely don’t want a no‑name generic that might swell, trigger error codes, or fail during a flight.

The new RRC2040‑2 battery matches the original in medical-grade performance and safety. Plus, it comes at a lower price.

Why Choose This Genuine Olympus Battery?

• Guaranteed Industrial Compatibility: Precision-engineered for Olympus Epoch 650 Flaw Detectors

• Stable 11.25V Output: Consistent power ensures accurate ultrasonic measurements

• Extended 6400mAh Capacity: Provides longer operational time for field inspections

• Investment Protection: Using non-genuine batteries risks measurement inaccuracies and potential equipment damage

Product Highlights:

• Industrial-Grade Li-ion Cells: 6400mAh capacity optimized for ultrasonic equipment

• Rugged Construction: Built to withstand challenging field environments

• Stable Power Delivery: Clean 11.25V output prevents measurement fluctuations

• Extended Cycle Life: Maintains capacity through numerous charge cycles

• Integrated Safety Features: Protection against overcharge, over-discharge, and short circuits

Technical Specifications:

• Battery Model: RRC2040-2 (Genuine/OEM)

• Voltage: 11.25V

• Capacity: 72.36Wh

• Compatibility: Olympus Epoch 650 Ultrasonic Flaw Detector

• Chemistry: Lithium-Ion

• Condition: New, genuine replacement

This genuine RRC2040-2 replacement battery delivers reliable power for industrial flaw detectors, ensuring accurate ultrasonic testing in field applications. As the certified battery for Olympus Epoch 650 series, it provides the stable performance and compatibility required for precision non-destructive testing.

Frequently Asked Questions (FAQ)

Q: Will this battery work with my Drive DeVilbiss iGo2?

Yes. RRC2040‑2 (also 125D‑613) is the official battery for the iGo2. Check your current battery label – if it matches, this is the direct replacement.

Q: How do I replace the battery? Is it user‑replaceable?

Yes, it’s external and tool‑free. The iGo2 has a battery compartment on the back. Slide the latch, remove the old battery, insert the new one until it clicks. No tools needed – you can swap in seconds.

Q: How long does a full charge last after replacement?

4–6 hours depending on your flow setting and breathing rate. Pulse setting 2 typically gives 5+ hours. Higher settings or continuous flow will reduce runtime. You’ll get back to the original runtime when the device was new.

Q: Can I carry a spare RRC2040‑2 battery for extended trips?

Absolutely. Many users carry two batteries – one in the iGo2, one charged and ready. That gives you 8–12 hours of total runtime without access to a charger.

Q: Is this battery safe for air travel?

Yes, with restrictions. At 95Wh, it is under the FAA 100Wh limit for carry‑on luggage without special approval. Always keep spare batteries in carry‑on, never checked, and protect terminals from shorting (use original packaging or tape). Check with your airline – some may require notification or have additional rules for medical batteries.

Q: How do I charge the battery?

Use the original Drive DeVilbiss iGo2 AC or DC charger. The battery charges in about 4–5 hours from empty to full. You can charge it while it’s in the concentrator or using an external charger (sold separately).

Q: What if my iGo2 shows a battery error after installation?

First, ensure the battery is fully seated (click). Plug in the charger and let it charge for 1 hour. If the error persists, try cleaning the battery contacts with a dry cloth. In rare cases, a device reset (refer to your manual) may be needed. If none works, contact us for a replacement under warranty.

Q: Do you offer discounts for buying two batteries?

Yes. For users who need extended runtime, we offer a two‑battery bundle. Contact us for pricing.

Order Now and maintain the accuracy of your ultrasonic flaw detection!