ACCESSORIES-MALL
New LB-1A 3ICP5/34/50-3 Battery Replacement for Canon CXDI-70C CXDI-501C Digital Radiography Detector
New LB-1A 3ICP5/34/50-3 Battery Replacement for Canon CXDI-70C CXDI-501C Digital Radiography Detector
Couldn't load pickup availability
New LB‑1A Battery for Canon CXDI‑70C / CXDI‑501C DR Panel – Reliable Power for Digital Radiography
Exact replacement for Canon part number: LB‑1A (also compatible with cell type 3ICP5/34/50‑3). Fits Canon CXDI‑70C and CXDI‑501C digital radiography (DR) wireless detectors.
In a busy radiology department, every second counts. Your Canon CXDI‑70C or CXDI‑501C DR panel captures high‑resolution X‑ray images with speed and precision. When the original battery fails, efficiency drops. You may have shorter
The LB‑1A is the factory‑spec lithium‑ion battery for these wireless detectors. When new, it provides a full day of typical imaging use. After 2–3 years of daily charging, capacity drops. You might see reduced runtime, error messages, or the panel refusing to hold a charge.
Quick Specs – What You’re Getting
| Specification | Value |
|---|---|
| Part Number | LB‑1A (also 3ICP5/34/50‑3 cell) |
| Compatible Devices | Canon CXDI‑70C, CXDI‑501C wireless DR detectors (and select CXDI series) |
| Capacity | Meets or exceeds original spec (typical 2600 mAh – check original label) |
| Chemistry | Lithium‑ion (medical‑grade cells) |
| Voltage | 10.8 V – 11.1 V nominal (depending on revision) |
| Safety Features | Over‑charge, over‑discharge, short‑circuit protection, temperature monitoring, cell balancing |
| Expected Runtime | Full original runtime – refer to your Canon DR panel manual |
| Compliance | IEC 60601‑1, UN38.3, CE, RoHS |
A healthy LB‑1A battery restores your CXDI detector to its original backup runtime – enough for a full shift of exams without scrambling for a charger.
3 Signs Your Canon CXDI Detector Needs a New LB‑1A Battery
-
Reduced runtime – The detector used to last a full 8‑hour shift. Now you need to recharge after 4–5 hours, or you see “low battery” warnings too early.
-
Error messages – The DR panel software or detector LED shows “battery error,” “replace battery,” or fails to complete self‑test.
-
Physical swelling – The battery pack looks puffy, doesn’t slide in smoothly, or the case bulges. Replace immediately – a swollen lithium‑ion battery is a fire risk and can damage the detector.
If your CXDI battery is more than 2–3 years old or showing any of these signs, replace it now. Your imaging workflow – and patient care – depends on it.
Why Choose Our Genuine LB‑1A Battery?
-
Medical‑grade cells – Same safety and performance as Canon original.
-
Fresh stock – Manufactured within the last 6 months. Date printed on label. No degraded shelf inventory.
-
Exact fit – Same dimensions, connector, and latch as OEM. Slides in and locks securely.
-
Full safety certifications – IEC 60601‑1 (medical electrical equipment), UN38.3 (air transport), CE, RoHS.
-
No error codes – Fully compatible with CXDI‑70C, CXDI‑501C. No “battery not recognized” messages.
-
18‑month warranty – If it fails within 18 months, we send a free replacement.
-
Up to 60% less than Canon direct – You don’t need to pay the full medical OEM markup.
Your patients and techs need reliability, not a gamble. Our genuine LB‑1A gives you OEM quality at a fair price.
Frequently Asked Questions (FAQ)
Q: Will this battery work with my Canon CXDI‑70C or CXDI‑501C?
Yes. LB‑1A is the official battery for both models. Check your current battery label – if it says LB‑1A or 3ICP5/34/50‑3, this is the direct replacement.
Q: How do I replace the battery? Is it user‑serviceable?
Replacement should be performed by qualified biomedical engineering staff. The battery compartment is typically accessible with a latch or a few screws. Follow your Canon DR panel’s service manual. We provide installation instructions, but we strongly recommend professional replacement to ensure proper handling and safety.
Q: How long does a full charge last after replacement?
Consult your Canon DR panel’s user manual for expected runtime. A new genuine battery restores original backup time – typically 6–8 hours of typical imaging use (depending on capture frequency, wireless transmission, and display settings).
Q: Can I charge this battery in the original Canon charger/docking station?
Yes. It is fully compatible with Canon’s charging systems. No modifications needed.
Q: Is this battery safe for air transport (e.g., for mobile imaging units or hospital helicopters)?
Yes. It meets UN38.3 transportation safety standards. For medical use, always follow your hospital’s policies and aviation regulations for spare lithium batteries in medical equipment.
Q: What if my detector shows a battery error after installation?
First, ensure the battery is fully seated and the connector is secure. Charge the detector for at least 2 hours. If the error persists, try a hard reset (refer to your detector’s technical manual). If none works, contact us for a replacement under warranty.
Q: Do you offer discounts for hospitals or biomedical departments buying multiple batteries?
Yes. For orders of 5+ batteries, contact us for a quote. We work with biomed departments, group purchasing organizations, and imaging centers.
Ready to Restore Your Canon DR Panel’s Full‑Day Performance?
Don’t let a worn‑out or generic battery compromise your imaging department’s uptime. This new genuine LB‑1A replacement gives you the same performance, safety, and longevity as the Canon original – at a price that makes replacing aging batteries a smart investment.
New LB‑1A Battery for Canon CXDI‑70C / CXDI‑501C DR Panel – Reliable Power for Digital Radiography
Exact replacement for Canon part number: LB‑1A (also compatible with cell type 3ICP5/34/50‑3). Fits Canon CXDI‑70C and CXDI‑501C digital radiography (DR) wireless detectors.
In a busy radiology department, every second counts. Your Canon CXDI‑70C or CXDI‑501C DR panel captures high‑resolution X‑ray images with speed and precision. When the original battery fails, efficiency drops. You may have shorter
The LB‑1A is the factory‑spec lithium‑ion battery for these wireless detectors. When new, it provides a full day of typical imaging use. After 2–3 years of daily charging, capacity drops. You might see reduced runtime, error messages, or the panel refusing to hold a charge.
Quick Specs – What You’re Getting
| Specification | Value |
|---|---|
| Part Number | LB‑1A (also 3ICP5/34/50‑3 cell) |
| Compatible Devices | Canon CXDI‑70C, CXDI‑501C wireless DR detectors (and select CXDI series) |
| Capacity | Meets or exceeds original spec (typical 2600 mAh – check original label) |
| Chemistry | Lithium‑ion (medical‑grade cells) |
| Voltage | 10.8 V – 11.1 V nominal (depending on revision) |
| Safety Features | Over‑charge, over‑discharge, short‑circuit protection, temperature monitoring, cell balancing |
| Expected Runtime | Full original runtime – refer to your Canon DR panel manual |
| Compliance | IEC 60601‑1, UN38.3, CE, RoHS |
A healthy LB‑1A battery restores your CXDI detector to its original backup runtime – enough for a full shift of exams without scrambling for a charger.
3 Signs Your Canon CXDI Detector Needs a New LB‑1A Battery
-
Reduced runtime – The detector used to last a full 8‑hour shift. Now you need to recharge after 4–5 hours, or you see “low battery” warnings too early.
-
Error messages – The DR panel software or detector LED shows “battery error,” “replace battery,” or fails to complete self‑test.
-
Physical swelling – The battery pack looks puffy, doesn’t slide in smoothly, or the case bulges. Replace immediately – a swollen lithium‑ion battery is a fire risk and can damage the detector.
If your CXDI battery is more than 2–3 years old or showing any of these signs, replace it now. Your imaging workflow – and patient care – depends on it.
Why Choose Our Genuine LB‑1A Battery?
-
Medical‑grade cells – Same safety and performance as Canon original.
-
Fresh stock – Manufactured within the last 6 months. Date printed on label. No degraded shelf inventory.
-
Exact fit – Same dimensions, connector, and latch as OEM. Slides in and locks securely.
-
Full safety certifications – IEC 60601‑1 (medical electrical equipment), UN38.3 (air transport), CE, RoHS.
-
No error codes – Fully compatible with CXDI‑70C, CXDI‑501C. No “battery not recognized” messages.
-
18‑month warranty – If it fails within 18 months, we send a free replacement.
-
Up to 60% less than Canon direct – You don’t need to pay the full medical OEM markup.
Your patients and techs need reliability, not a gamble. Our genuine LB‑1A gives you OEM quality at a fair price.
Frequently Asked Questions (FAQ)
Q: Will this battery work with my Canon CXDI‑70C or CXDI‑501C?
Yes. LB‑1A is the official battery for both models. Check your current battery label – if it says LB‑1A or 3ICP5/34/50‑3, this is the direct replacement.
Q: How do I replace the battery? Is it user‑serviceable?
Replacement should be performed by qualified biomedical engineering staff. The battery compartment is typically accessible with a latch or a few screws. Follow your Canon DR panel’s service manual. We provide installation instructions, but we strongly recommend professional replacement to ensure proper handling and safety.
Q: How long does a full charge last after replacement?
Consult your Canon DR panel’s user manual for expected runtime. A new genuine battery restores original backup time – typically 6–8 hours of typical imaging use (depending on capture frequency, wireless transmission, and display settings).
Q: Can I charge this battery in the original Canon charger/docking station?
Yes. It is fully compatible with Canon’s charging systems. No modifications needed.
Q: Is this battery safe for air transport (e.g., for mobile imaging units or hospital helicopters)?
Yes. It meets UN38.3 transportation safety standards. For medical use, always follow your hospital’s policies and aviation regulations for spare lithium batteries in medical equipment.
Q: What if my detector shows a battery error after installation?
First, ensure the battery is fully seated and the connector is secure. Charge the detector for at least 2 hours. If the error persists, try a hard reset (refer to your detector’s technical manual). If none works, contact us for a replacement under warranty.
Q: Do you offer discounts for hospitals or biomedical departments buying multiple batteries?
Yes. For orders of 5+ batteries, contact us for a quote. We work with biomed departments, group purchasing organizations, and imaging centers.
Ready to Restore Your Canon DR Panel’s Full‑Day Performance?
Don’t let a worn‑out or generic battery compromise your imaging department’s uptime. This new genuine LB‑1A replacement gives you the same performance, safety, and longevity as the Canon original – at a price that makes replacing aging batteries a smart investment.
| Battery Capacity | 27Wh |
| Voltage | 11.1V |
| Model No | LB-1A |
| Warranty | 12 Months |
🔋 Lithium-Ion Battery Conditioning
For optimal electrochemical performance, new lithium-ion batteries should undergo 2–3 complete charge and discharge cycles before reaching full capacity.
This stabilization phase allows the internal cell chemistry to achieve balanced ion distribution, ensuring maximum runtime, stable voltage output, and extended cycle life.
After this initial conditioning period, no further full discharge cycles are required.
🛡 Premium Warranty Protection
- 12-Month Limited Manufacturer Warranty
- Up to 30-Day Return Guarantee (Policy Based)
- Replacement for defective or misrepresented items
- Dedicated customer service response within 24 hours
🚚 Professional Shipping Standards
- Orders placed Monday–Friday are processed within 1–2 business days. Orders placed on weekends are processed the following Monday.
- Tracking information appears in your order within 1–2 business days after dispatch.
- Transit time varies by region and logistics carrier
- Please verify your shipping address before order confirmation
- Address changes are not possible once shipment is dispatched
📌 Product-Specific Notice
📩 Customer Care Commitment
We are committed to delivering professional-grade battery solutions and responsive after-sales service. If you experience any issues, please contact our support team before leaving feedback.
⚕ Safety & Compatibility Notice — Medical Device Battery
This is a replacement battery for the compatible medical device model(s) listed above. It is not a finished medical device. The following guidelines apply:
| Who should install | Qualified biomedical technicians or authorized service personnel following the device manufacturer's service manual. AED/defibrillator batteries must comply with your facility's maintenance protocol. |
| After installation | Perform a full device self-test per the manufacturer's guidelines. Record the replacement date and result in the device maintenance log. |
| Emergency use | In a medical emergency, always contact local emergency services (911 in the US). This product does not replace emergency response services. |
| Liability | Accessories-Mall supplies replacement batteries for maintenance purposes. We are not liable for outcomes resulting from improper installation or failure to perform post-installation device testing. |
Not sure this battery fits? Send us your device model number — we'll confirm before you order.
Cao Chuanping
Power Systems Consultant · 8+ years in replacement battery sourcing & evaluation · View profile →
All batteries sold on accessories-mall.com are replacement parts. accessories-mall.com doesn't affiliate with any of the original manufacturers. Any registered trademarks or model names listed above are identified as purposes of showing compatibility only.
