ACCESSORIES-MALL
ABL-D1 replacement battery for iRobot Roomba i7 i7+ j7 j7+ i4 i4+ e5 e6
ABL-D1 replacement battery for iRobot Roomba i7 i7+ j7 j7+ i4 i4+ e5 e6
Couldn't load pickup availability
You can purchase a working Roomba i7 replacement battery from specialized online retailers like Accessories-Mall by selecting an ABL-D1 compatible 14.4V lithium-ion pack. Choose models offering a 1800mAh to 3000mAh capacity, integrated BMS circuit protection, and a 12-month warranty to ensure full compatibility and consistent charging performance.
Key Technical Specifications & Selection Criteria
Model Compatibility and Voltage Standard
The Roomba i7 requires exact model matching to communicate with the vacuum's internal power management firmware. The replacement unit must match the original part number ABL-D1 (or ABL-D2) and operate at a nominal voltage of 14.4V (or 14.8V).
Battery Capacity and Operational Runtime
Battery capacity determines the total square footage the vacuum can clean on a single charge cycle. Standard replacement units range from 1800mAh to 3000mAh, with a 2600mAh battery yielding 75 to 90 minutes of continuous cleaning time.
Battery Management System (BMS)
A built-in protection circuit prevents cell damage caused by overcharging, deep discharge, overcurrent, and thermal overload. An integrated BMS maintains cell balance across a minimum service rating of 500 charge-discharge cycles.
Vendor Warranty and Return Terms
Purchasing from vendors with defined warranty policies mitigates the risk of receiving dead-on-arrival or degraded cells. Look for vendors offering a minimum 12-month replacement warranty and a 30-day return policy.
Precision Compatibility
This is the official battery replacement for the following iRobot Roomba models:
-
Roomba i-Series: i7, i7+ (7158), i8, i8+, i4, i4+
-
Roomba j-Series: j7, j7+ (7550), j9
-
Roomba e-Series: e5, e6
Important Incompatibility Notice
-
This battery is NOT compatible with:
-
- Any Roomba Combo model (e.g., Combo j7+, Combo i7+)
- Roomba s-Series models (e.g., s9+, s9)
- Roomba 600, 700, 800, 900 Series
Key Specifications & Authenticity
-
Battery Model: ABL-D1 (Genuine iRobot OEM)
-
Type: Lithium Ion
-
Condition: Brand New, Original Manufacturer Part
-
Compatibility: Roomba i-Series, e-Series, j-Series (Non-Combo)
Easy Self-Installation (Under 2 Minutes)
-
Flip your Roomba over and press the battery compartment latch.
-
Pull the tab to remove the old ABL-D1 battery.
-
Insert the new genuine ABL-D1 battery until it clicks into place.
-
Place your Roomba on the Home Base for a full charge.
Post-Installation Tip
After installing the new battery, your Roomba may require a quick "bump charge" on the Home Base (about 10 seconds) to recognize the new power source before beginning a full charge cycle.
Ready to Restore Factory-Fresh Performance?
Order the Genuine ABL-D1 battery today and get back to a perfectly mapped clean.
Compatible with roomba models:
Tips: Before starting the roomba after installing the battery, please hold down the switch button for more than 5 seconds until the roomba is completely turned off, and then restart the roomba.
- For iRobot Roomba i3 i3+ i3 Plus 3150 3158 3550 3556 3558 i3150 i3152 i3154 i3156 i3158 i3550 i3552 i3554 i356 3558
- For iRobot Roomba i4 i4+ i4 Plus 4150 4550 4552 i4150
- For iRobot Roomba e5 5150 e5150 e5152 e5154 e5158
- For iRobot Roomba e6 6198 e6198 e619820
- For iRobot Roomba i7 i7+ i7 Plus 7150 7156 7158 7550 7558 i7150 i7156 i7158 i7550 i7556 i7558
- For iRobot Roomba j7 j7+ j7 Plus
- For iRobot Roomba i8 i8+ 8550 i8550 i855020
- For iRobot Roomba j9 j9+
(Tip: Not applicable to irobot roomba combo series. Not applicable to irobot roomba J series.)
(Note: If your Roomba uses a third-party charging dock, make sure the roomba does not run out of charge during use. The battery should have at least 10% remaining charge, otherwise excessive discharge of the battery can damage it and prevent it from charging.)
You can purchase a working Roomba i7 replacement battery from specialized online retailers like Accessories-Mall by selecting an ABL-D1 compatible 14.4V lithium-ion pack. Choose models offering a 1800mAh to 3000mAh capacity, integrated BMS circuit protection, and a 12-month warranty to ensure full compatibility and consistent charging performance.
Key Technical Specifications & Selection Criteria
Model Compatibility and Voltage Standard
The Roomba i7 requires exact model matching to communicate with the vacuum's internal power management firmware. The replacement unit must match the original part number ABL-D1 (or ABL-D2) and operate at a nominal voltage of 14.4V (or 14.8V).
Battery Capacity and Operational Runtime
Battery capacity determines the total square footage the vacuum can clean on a single charge cycle. Standard replacement units range from 1800mAh to 3000mAh, with a 2600mAh battery yielding 75 to 90 minutes of continuous cleaning time.
Battery Management System (BMS)
A built-in protection circuit prevents cell damage caused by overcharging, deep discharge, overcurrent, and thermal overload. An integrated BMS maintains cell balance across a minimum service rating of 500 charge-discharge cycles.
Vendor Warranty and Return Terms
Purchasing from vendors with defined warranty policies mitigates the risk of receiving dead-on-arrival or degraded cells. Look for vendors offering a minimum 12-month replacement warranty and a 30-day return policy.
Precision Compatibility
This is the official battery replacement for the following iRobot Roomba models:
-
Roomba i-Series: i7, i7+ (7158), i8, i8+, i4, i4+
-
Roomba j-Series: j7, j7+ (7550), j9
-
Roomba e-Series: e5, e6
Important Incompatibility Notice
-
This battery is NOT compatible with:
-
- Any Roomba Combo model (e.g., Combo j7+, Combo i7+)
- Roomba s-Series models (e.g., s9+, s9)
- Roomba 600, 700, 800, 900 Series
Key Specifications & Authenticity
-
Battery Model: ABL-D1 (Genuine iRobot OEM)
-
Type: Lithium Ion
-
Condition: Brand New, Original Manufacturer Part
-
Compatibility: Roomba i-Series, e-Series, j-Series (Non-Combo)
Easy Self-Installation (Under 2 Minutes)
-
Flip your Roomba over and press the battery compartment latch.
-
Pull the tab to remove the old ABL-D1 battery.
-
Insert the new genuine ABL-D1 battery until it clicks into place.
-
Place your Roomba on the Home Base for a full charge.
Post-Installation Tip
After installing the new battery, your Roomba may require a quick "bump charge" on the Home Base (about 10 seconds) to recognize the new power source before beginning a full charge cycle.
Ready to Restore Factory-Fresh Performance?
Order the Genuine ABL-D1 battery today and get back to a perfectly mapped clean.
Compatible with roomba models:
Tips: Before starting the roomba after installing the battery, please hold down the switch button for more than 5 seconds until the roomba is completely turned off, and then restart the roomba.
- For iRobot Roomba i3 i3+ i3 Plus 3150 3158 3550 3556 3558 i3150 i3152 i3154 i3156 i3158 i3550 i3552 i3554 i356 3558
- For iRobot Roomba i4 i4+ i4 Plus 4150 4550 4552 i4150
- For iRobot Roomba e5 5150 e5150 e5152 e5154 e5158
- For iRobot Roomba e6 6198 e6198 e619820
- For iRobot Roomba i7 i7+ i7 Plus 7150 7156 7158 7550 7558 i7150 i7156 i7158 i7550 i7556 i7558
- For iRobot Roomba j7 j7+ j7 Plus
- For iRobot Roomba i8 i8+ 8550 i8550 i855020
- For iRobot Roomba j9 j9+
(Tip: Not applicable to irobot roomba combo series. Not applicable to irobot roomba J series.)
(Note: If your Roomba uses a third-party charging dock, make sure the roomba does not run out of charge during use. The battery should have at least 10% remaining charge, otherwise excessive discharge of the battery can damage it and prevent it from charging.)
| Battery Capacity | 1800mAh/26Wh |
| Voltage | 14.4V |
| Model No | ABL-D1 |
| Warranty | 12 Months |
🔋 Lithium-Ion Battery Conditioning
For optimal electrochemical performance, new lithium-ion batteries should undergo 2–3 complete charge and discharge cycles before reaching full capacity.
This stabilization phase allows the internal cell chemistry to achieve balanced ion distribution, ensuring maximum runtime, stable voltage output, and extended cycle life.
After this initial conditioning period, no further full discharge cycles are required.
🛡 Premium Warranty Protection
- 12-Month Limited Manufacturer Warranty
- Up to 30-Day Return Guarantee (Policy Based)
- Replacement for defective or misrepresented items
- Dedicated customer service response within 24 hours
🚚 Professional Shipping Standards
- Orders placed Monday–Friday are processed within 1–2 business days. Orders placed on weekends are processed the following Monday.
- Tracking information appears in your order within 1–2 business days after dispatch.
- Transit time varies by region and logistics carrier
- Please verify your shipping address before order confirmation
- Address changes are not possible once shipment is dispatched
📌 Product-Specific Notice
📩 Customer Care Commitment
We are committed to delivering professional-grade battery solutions and responsive after-sales service. If you experience any issues, please contact our support team before leaving feedback.
✓ Safety & Quality Assurance
- Built-in protection against overcharging, overheating, and short circuits.
- Shipped in compliance with IATA regulations for lithium batteries.
- Compatible with OEM chargers. No firmware modification required.
Questions about compatibility? Contact us with your device model number before ordering.
Cao Chuanping
Power Systems Consultant · 8+ years in replacement battery sourcing & evaluation · View profile →
